 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TC7MET139AFK TOSHIBA CMOS Didital Integrated Circuit Silicon Monolithic TC7MET139AFK Dual 2-to-4 Line Decoder The TC7MET139AFK is an advanced high speed CMOS 2 to 4 line decoder/demultiplexer fabricated with silicon gate C2MOS technology. It achieves the high speed operation similar to equivalent bipolar schottky TTL while maintaining the CMOS low power dissipation. The active low enable input can be used for gating or it can be used as a data input for demultiplexing applications. When the enable input is held High, all four outputs are fixed at a high logic level independent of the other inputs. The input voltage are compatible with TTL output voltage. This device may be used as a level converter for interfacing 3.3 Weight: 0.02 g (typ.) V to 5 V system. Input protection and output circuit ensure that 0 to 5.5 V can be applied to the input and output (*) pins without regard to the supply voltage. These structure prevents device destruction due to mismatched supply and input/output voltages such as battery back up, hot board insertion, etc. *: VCC = 0 V Features * * * * * * * High speed: tpd = 5.0 ns (typ.) (VCC = 5 V) Low power dissipation: ICC = 4 A (max) (Ta = 25C) Compatible with TTL outputs: VIL = 0.8 V (max) VIH = 2.0 V (min) Power down protection is provided on all inputs and outputs. Balanced propagation delays: tpLH tpHL Low noise: VOLP = 0.8 V (max) Pin and function compatible with the 74 series (74AC/HC/F/ALS/LS etc.) 139 type. 1 2001-09-12 TC7MET139AFK Pin Assignment (top view) 1G 1A 1B 1Y0 1Y1 1Y 2 1Y3 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 VCC 2G 2A 2B 2Y 0 2Y1 2Y 2 2Y 3 GND IEC Logic Symbol X/Y 1 2 EN 0 1 2 3 Dmux 0 G 3 1A 1B 1G (2) (3) (1) 2A 2B 2G (14) (13) (15) (4) (5) (6) (7) (12) (11) (10) (9) 1Y 0 1Y1 1Y 2 1Y 3 2Y0 2 Y1 2Y 2 2Y3 1A 1B 1G (2) (3) (1) 0 1 0 1 2 3 2A 2B 2G (14) (13) (15) (4) (5) (6) (7) (12) (11) (10) (9) 1Y 0 1Y1 1Y 2 1Y 3 2Y0 2 Y1 2Y 2 2Y3 Truth Table Inputs Enable G Outputs Select Y0 Selected Output Y1 Y2 Y3 B X L L H H A X L H L H H L H H H H H L H H H H H L H H H H H L None Y0 Y1 Y2 Y3 H L L L L X: Don't care 2 2001-09-12 TC7MET139AFK System Diagram 4/12 Y0 A 2/14 5/11 Y1 B 3/13 6/10 Y2 G 1/15 7/9 Y3 Maximum Ratings Characteristics Supply voltage range DC input voltage DC output voltage Input diode current Output diode current DC output current DC VCC/ground current Power dissipation Storage temperature Symbol VCC VIN VOUT IIK IOK IOUT ICC PD Tstg Rating -0.5~7.0 -0.5~7.0 -0.5~7.0 -0.5~VCC + 0.5 -20 20 25 50 Unit V V (Note1) (Note2) mA (Note3) mA mA mA mW C V 180 -65~150 Note1: VCC = 0 V Note2: High or low state. IOUT absolute maximum rating must be observed. Note3: VOUT < GND, VOUT > VCC Recommended Operating Conditions Characteristics Supply voltage Input voltage Output voltage Operating temperature Input rise and fall time Symbol VCC VIN VOUT Topr dt/dv Rating 4.5~5.5 0~5.5 0~5.5 0~VCC -40~85 Unit V V (Note4) (Note5) C ns/V V 0~20 Note4: VCC = 0 V Note5: High or low state. 3 2001-09-12 TC7MET139AFK Electrical Characteristics DC Characteristics Characteristics High level Low level High level Output voltage Low level Input leakage current VOL IIN ICC Quiescent supply current ICCT Output leakage current IOPD Symbol VIH VIL VOH Test Condition VCC (V) Input voltage 3/4 3/4 Ta = 25C Min 2.0 3/4 Ta = -40~85C Max 3/4 Unit Typ. 3/4 3/4 Min 2.0 3/4 Max 3/4 4.5~5.5 4.5~5.5 4.5 4.5 4.5 4.5 0~5.5 5.5 5.5 0 V 0.8 3/4 3/4 0.8 3/4 3/4 VIN = VIH IOH = -50 mA or VIL IOH = -8 mA VIN = VIH IOL = 50 mA or VIL IOL = 8 mA VIN = 5.5 V or GND VIN = VCC or GND Per input: VIN = 3.4 V Other input: VCC or GND VOUT = 5.5 V 4.4 3.94 3/4 3/4 3/4 3/4 3/4 3/4 4.5 3/4 4.4 3.80 3/4 3/4 3/4 3/4 3/4 3/4 V 0 3/4 3/4 3/4 3/4 3/4 0.1 0.36 0.1 0.1 0.44 1.0 mA mA 4.0 1.35 0.5 40.0 1.50 5.0 mA mA AC Characteristics (Input: tr = tf = 3 ns) Characteristics Propagation delay time (A, B- Y ) Propagation delay time (G-Y ) Input capacitance Power dissipation capacitance Symbol tpLH tpHL tpLH tpHL CIN CPD Test Condition VCC (V) 3/4 Ta = 25C CL (pF) 15 50 Min 3/4 3/4 3/4 3/4 3/4 Ta = -40~85C Max 7.2 9.2 7.2 9.2 10 3/4 Unit Typ. 5.0 6.5 5.0 6.5 4 32 Min 1.0 1.0 1.0 1.0 3/4 3/4 Max 8.5 10.5 8.5 10.5 10 3/4 5.0 0.5 ns 3/4 5.0 0.5 3/4 15 50 ns pF pF (Note6) 3/4 Note6: CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: ICC (opr) = CPDVCCfIN + ICC/2 (per decoder) 4 2001-09-12 TC7MET139AFK Package Dimensions Weight: 0.02 g (typ.) 5 2001-09-12 TC7MET139AFK RESTRICTIONS ON PRODUCT USE 000707EBA * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc.. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. * The products described in this document are subject to the foreign exchange and foreign trade laws. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. * The information contained herein is subject to change without notice. 6 2001-09-12 |
Price & Availability of TC7MET139AFK
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |